800 Lt.Metal Flat Lidded Galvanized Waste Container Metal Waste Container
TECHNICAL SPECIFICATIONS;
Body mouth is surrounded with 25x50 mm U profile.
The body was boiled without slag with the complete gas welding.
The cover is plastered from a single piece of 1.5 mm sheet and provided to be durable and aesthetic.
The opening handle on the cover is a lock with a snap, and it is reinforced with an internal strength-enhancing profile.
The container is TS EN 840-3 Standard Certificate of Conformity.
To the front surface; The name of the municipality, the figure of the Trash Thrower and the slogan Let's Keep Our Environment Clean is written.
The body is curled from a 2 mm sheet of hair and its strength is increased by pressing the body and sides.
The side of the body is bent 1.5 cm, grasping the body from the outside and the base corners and upper back mouth are radius.
Lifting arms suitable for the lifting apparatus on the vehicle are 45x10 cm in size, drilled through 4 mm sheet metal, 16 mm round arm is welded to the body by boiling from below and above.
The carrier has 4 wide tongs, 360º rotating 160x45 size tong sheet, at least 3.50 mm in size, according to TS EN 12532 standard wheel.
Wheel connection plate is 4.00 mm.
The container is manufactured in accordance with the Technical Drawing and Technical Specifications and 80-90 micron galvanized in accordance with the TS 914 EN IS0 1461 standard with the complete Hot Dip Galvanizing system.
